Congratulations! Your promo code PROMOCODE will be automatically applied when you check out – enjoy.
AEG SolarCube 9.6 kWh System
AEG SolarCube AEG 1xHost 2x4.8kWh Stackable Batteries the plug-and-play home battery system backed by 10 years.
9.6 kWh plug-in plug and play home energy storage battery system - no electrician, no rewiring no MCS / DNO paperwork.
Cut your electricity bill without touching your meter box. The AEG SolarCube is a true plug-in home battery - lift it into place, plug it into a standard 13A socket, pair it with your smart meter, and start storing cheap off-peak power for the hours when prices spike.
It works seamlessly with solar panels, or stands entirely on its own on a dynamic tariff like Octopus Agile, Flux or Cosy.
German-engineered, LFP-safe and protected by a 10-year warranty.
Key benefits
- True plug-and-play setup - Out of the box to operational in under 30 minutes via a standard grounded UK socket. No electrician, no rewiring, no waiting list.
- The perfect retrofit for existing solar - Already have a string inverter or non-hybrid microinverter setup? You don't need to rip it out or swap to a hybrid. The SolarCube is AC-coupled, so it sits alongside your existing inverter and simply plugs into a socket. The fastest, lowest-friction way to add storage to a system that was never designed for a battery.
- Save up to £1000 a year - Charge when wholesale prices dip (often below 10p/kWh on smart tariffs), discharge during the 4–7pm peak when grid power can exceed 24p/kWh. Compatible with every major UK dynamic tariff.
- 6,000+ cycle life, 10-year warranty - Built on LiFePO4 chemistry: thermally stable, cobalt-free, and rated for well over a decade of daily cycling. Peace of mind, written down.
- IP65 rated - indoor or outdoor install - Fully dust-tight and weather-sealed, with an operating range of -20°C to +55°C. Mount it in the utility room, the garage, or outside under a canopy or eaves. We recommend siting it sheltered from direct rain and full sun to keep the housing looking factory-fresh, but the electronics are protected either way.
- 9.6 kWh and modular up to 14.4 kWh - add expansion modules as your household, EV or heat pump load grows. No need to replace the base unit - just stack and plug in.
- Backup power when the grid goes down - A dedicated off-grid output of up to 2,400 W keeps lights, broadband and the fridge running through outages.
- A name you already trust - AEG: German electrical engineering since 1883
How it works (3 steps)
- Plug in - into any standard grounded UK socket, indoors or out.
- Octopus ready. Can read live octopus tariff without a dongle or clamp. For other energy providers pairs your smart/ non-smart meter via a dongle/clamp or HomeWizard bridge
- Save automatically - the SolarCube learns your tariff and your household pattern, charging cheap and discharging at peak without you lifting a finger.
At a glance
| Usable capacity: | 9.6 kWh, expandable to 14.4 kWh |
| Chemistry: | LiFePO4 (LFP) |
| Inverter output: | 800 W via standard socket; up to 2,400 W on a dedicated circuit |
| Charging power: | Up to 2,400 W |
| Cycle life: | 6,000+ |
| Warranty: | 10 years |
| Coupling: | AC - works with any solar inverter, including string and non-hybrid microinverter setups |
| Installation: | Plug-in, 13A grounded socket, no installer required. True Plug-and-Play Home |
| Backup output: | Dedicated off-grid port, up to 2,400 W |
| Ingress protection: | IP65 - suitable for indoor or sheltered outdoor installation |
| Operating temperature: | -20°C to +55°C |
| Safety: | Integrated aerosol fire-suppression system, active cell heating, over-current, over-voltage and short-circuit protection |
| Dimensions: | 632 × 292 × 450 mm |
| Weight: | 12.7 kg (inverter module) / 2x 59.7 kg (2 battery modules ) |
Downloads
