Aircon Direct
Appliances Direct
Laptops Direct
Drones Direct
Better Bathrooms
Furniture 123
Dehumidifiers
Outdoor Living
Aircon
My Account

Track Order Business Enquiries
Inc. VAT vat switch show inc Ex. VAT Inc. VAT vat switch show ex Ex. VAT
£ UK flagcurrency switchEU flag £ UK flagcurrency switchEU flag

AEG SolarCube 14.4 kWh Plug-In Home Energy Storage Battery with 10-Year Guarantee - August Pre-Order

SKU: AEGPLUGIN14.4kWhESS Quickfind Code: 2089614
£3299.00

Product Options

Battery Capacity

Why buy me

  • 14.4kWh Capacity - Maximum storage for heavy EV or heat pump demands.
  • Plug & Play Setup - Ready to save in under 30 mins using a standard socket.
  • Zero Red Tape - Skip complicated DNO/MCS forms for instant home storage.
  • Save on Bills - Store cheap power to run your home when prices spike.
  • Universal Retrofit - Drops into existing solar setups with zero rewiring.
  • Octopus Integrated - Auto-tracks smart tariffs to grab the lowest rates.
  • Emergency Backup - Keep your Wi-Fi, fridge, and lights on during power cuts.
  • 10-Year Warranty - German-engineered safety with fire suppression built in.
click

AEG SolarCube 14.4 kWh Home Energy Storage System

AEG SolarCube 14.4 kWh - the plug-and-play home battery, backed by 10 years.

1xHost and 3x4.8 kWh plug-in plug and play home energy storage battery - no electrician, no rewiring no MCS / DNO paperwork.

Cut your electricity bill without touching your meter box. The AEG SolarCube is a true plug-in home battery - lift it into place, plug it into a standard 13A socket, pair it with your smart meter, and start storing cheap off-peak power for the hours when prices spike.

It works seamlessly with solar panels, or stands entirely on its own on a dynamic tariff like Octopus Agile, Flux or Cosy.

German-engineered, LFP-safe and protected by a 10-year warranty.


Key benefits

  • True plug-and-play setup - Out of the box to operational in under 30 minutes via a standard grounded UK socket. No electrician, no rewiring, no waiting list.
  • The perfect retrofit for existing solar - Already have a string inverter or non-hybrid microinverter setup? You don't need to rip it out or swap to a hybrid. The SolarCube is AC-coupled, so it sits alongside your existing inverter and simply plugs into a socket. The fastest, lowest-friction way to add storage to a system that was never designed for a battery.
  • Save up to £1000 a year - Charge when wholesale prices dip (often below 10p/kWh on smart tariffs), discharge during the 4–7pm peak when grid power can exceed 24p/kWh. Compatible with every major UK dynamic tariff.
  • 6,000+ cycle life, 10-year warranty - Built on LiFePO4 chemistry: thermally stable, cobalt-free, and rated for well over a decade of daily cycling. Peace of mind, written down.
  • IP65 rated - indoor or outdoor install - Fully dust-tight and weather-sealed, with an operating range of -20°C to +55°C. Mount it in the utility room, the garage, or outside under a canopy or eaves. We recommend siting it sheltered from direct rain and full sun to keep the housing looking factory-fresh, but the electronics are protected either way.
  • 14.4 kWh -  maximum power.
  • Backup power when the grid goes down - A dedicated off-grid output of up to 2,400 W keeps lights, broadband and the fridge running through outages.
  • A name you already trust - AEG: German electrical engineering since 1883

How it works (3 steps)

  1. Plug in - into any standard grounded UK socket, indoors or out.
  2. Octopus ready. Can read live octopus tariff without a dongle or clamp. For other energy providers pairs your smart/ non-smart meter via a dongle/clamp or HomeWizard bridge
  3. Save automatically - the SolarCube learns your tariff and your household pattern, charging cheap and discharging at peak without you lifting a finger.

At a glance

Usable capacity:  14.4 kWh
Chemistry: LiFePO4 (LFP)
Inverter output: 800 W via standard socket; up to 2,400 W on a dedicated circuit
Charging power: Up to 2,400 W
Cycle life: 6,000+
Warranty: 10 years
Coupling: AC - works with any solar inverter, including string and non-hybrid microinverter setups
Installation: Plug-in, 13A grounded socket, no installer required
Backup output: Dedicated off-grid port, up to 2,400 W
Ingress protection: IP65 - suitable for indoor or sheltered outdoor installation
Operating temperature: -20°C to +55°C
Safety: Integrated aerosol fire-suppression system, active cell heating, over-current, over-voltage and short-circuit protection
Dimensions: 632 × 292 × 450 mm
Weight: 12.7 kg (inverter module) / 3x59.7 kg (3xbattery modules)

Downloads

Datasheet

 
 

Back to top