Broughton 9kW Low GWP Portable Monoblock Commercial Air Conditioner

The details

Effective cooling for your commercial space, whether that’s an office or warehouse, or spot cooling when you need it, the Broughton MCe9.0 is the best at what it does.

Building on the legacy of the MCM350, the unit that invented high volume portable cooling, the all new MCe9.0 not only promises a massive 9kW of cooling but it does so with today's environmentally conscious user in mind. High efficiency EC fan technology is used to improve fan performance whilst the all new low GWP (global warming potential) refrigerant is 95% less harmful than traditional types, ensuring maximum performance with minimum impact.

In addition to the environmental credentials the MCe9.0 delivers unrivalled performance. 9kW of cooling from a standard 13A supply and powerful backward curved fans that can exhaust warm air over 10m through of lightweight, standard 200mm ducting that's much easier to handle and store than some of the 300-400mm duct that's commonly used.

All new for this year is the digital thermostat that allows the user to set the desired temperature and sit back while the unit maintains it. Also featuring fully adjustable airflow, auto shut off and indicator light when the condensate tank is full and lockable castors for easy manoeuvrability. Ideal for use either as a spot cooler or to help regulate temperatures wherever the need arises, the MCe9.0 is a fully portable powerhouse that ticks the environmental boxes.

Please Note:

The MCe9.0 is a Mono-block portable air conditioning unit. It is connected to a 13 Amp. 230Vac. 50Hz power supply and comes fitted with a fused uk moulded plug. It is recommended that the supply to the machine should be protected by a 30mA RCD. The MCe9.0 is supplied with 2.5m insulated exhaust duct, and 2 x 500mm click stop cooling duct. Further ducting available separately.

The appliance must be serviced by qualified engineers in compliance with local regulations. The appliance must be switched off and disconnected from the power supply before any work is carried out. An air gap of at least 300mm should be allowed at the front and rear of the unit to ensure a clear airflow. Extension cables should be correctly rated for the load, fully unwound and never run through water or over sharp edges.

This appliance contains an A2L refrigerant classified as mildly flammable. Always read the user and service manual before operation. The minimal charge within the appliance does not require a minimum room size for safe operation.