GRADE A1 - Ebac WM80 industrial dehumidifier

This is a graded product. A1 products are "as new" but have been box opened. All A1 products will be fully bubble-wrapped for transportation.

GRADE A1

The WM range of units, are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped with an internal condensate pump for easy removal of collected moisture. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. Because the WM range of units are equipped with an internal humidistat, they automatically switch on and off to save energy and expense by maintaining the desired level of humidity with intermittent operation.

Features

• Voltage: 230
• Phase: 1
• Frequency(Hz): 50
• Power(kW): 0.7
• Current(A): 4
• Airflow(m3/hr): 260
• Noise Level(dba): 58
• Effective Volume(m3): 200
• Typical Extraction(l/d): 20
• Min Operating Temp (°C): 3
• Max OperatingTemp (°C): 35